The Facilities We Offer

Shop 1

Fabrication Area: 95,000 Square Feet (5,000 Square Feet clean bay for stainless steel).
3 No Access Doors 6m Square.

Inside Craneage 1 x 60 Tonne Drilling Up to 3" Diameter by Radial Arm Drills
  1 x 20 Tonne  
  4 x 10 Tonne  
  6 x 5 Tonne Machining Various Milling Machines
  1 x 3 Tonne  
Brake Press Up To 400 Tonnes - 5mt Bed Screw Cutting Up to 2.5in BSP
Sawing Up To 16" x 16" Capacity Tube Bending Up to 2in Nominal Bore
Lathes Up To 24ft x 40in Capacity Level Setting Up tables 21mt Long x 7mt Wide
Plate Cutting Up to 4mt x 16mm thick    

Welders approved by Lloyds Register / Det Norse Veritas / National Vulcan to BS4870 ASME IX AWS EN287

Fabrication carried out in the following metals.  
Carbon Manganese Steel 4.8mm to 100mm GMAW / SMAW
Mild and Medium Carbon Steel 4.8mm to 60mm GMAW / SMAW
Low Alloy Steel 4.8mm to 25mm GMAW
Stainless Steel in 316 and 304 3mm to 12.5mm GMAW
R.Q.T. 701 Hard Wearing Steel 4.8mm to 30mm and 15mm to 60mm GMAW

Shop 2

Fabrication Area No. 1 - 23,000 Square Feet. Fabrication Area No. 2 - 30,000 Square Feet.
Access Doors 1 off 6m x 6m, 1 off 4m x 4m.
Outside Hard Standing Area 10,000 Square Feet.

Inside Craneage 1 x 20 Tonne Plate Cutting Up to 12mm at 4mm Wide
  3 x 10 Tonne   Up to 20mm at 3mm Wide
  2 x 5 Tonne    
Brake Press Up to 500 Tonnes - 5mt Bed Drilling Up to 3" Diameter by Radial Arm Drills
Sawing Up to 16" x 16" Capacity Machining Various Milling Machines
Lathes Up to 24ft x 40in Swing Screw Cutting Up to 2.5ins BSP
Plate Rolling Up ro 3mt x 25mm Capacity Level Setting Up Tables 21mt Long x 7mt Wide

Shop 3 (fitting out shop)

Fitting Shop Area 15,000 Square Feet.
Access Doors 1 off 5m x 5m.

Inside Craneage 1 x 40 Tonne    
  1 x 10 Tonne    

Transportation